ZyWALL 5/35/70 Series User’s Guide
The following table describes the fields in this menu.
Table 208 Menu 11.1: Remote Node Profile for Ethernet Encapsulation
FIELD | DESCRIPTION |
|
|
Rem Node Name | Enter a descriptive name for the remote node. This field can be up to eight |
| characters. |
Active | Press [SPACE BAR] and then [ENTER] to select Yes (activate remote node) or No |
| (deactivate remote node). |
Encapsulation | Ethernet is the default encapsulation. Press [SPACE BAR] and then [ENTER] to |
| change to PPPoE or PPTP encapsulation. |
Service Type | Press [SPACE BAR] and then [ENTER] to select from Standard, |
| (RoadRunner Toshiba authentication method), |
| Manager authentication method), |
| RoadRunner methods if your ISP is Time Warner's RoadRunner; otherwise choose |
| Standard. |
Outgoing |
|
|
|
My Login | This field is applicable for PPPoE encapsulation only. Enter the login name |
| assigned by your ISP when the ZyWALL calls this remote node. Some ISPs append |
| this field to the Service Name field above (e.g., jim@poellc) to access the PPPoE |
| server. |
My Password | Enter the password assigned by your ISP when the ZyWALL calls this remote node. |
| Valid for PPPoE encapsulation only. |
Retype to | Type your password again to make sure that you have entered it correctly. |
Confirm |
|
Server | This field is valid only when RoadRunner is selected in the Service Type field. The |
| ZyWALL will find the RoadRunner Server IP automatically if this field is left blank. If |
| it does not, then you must enter the authentication server IP address here. |
Relogin Every | This field is available when you select Telia Login in the Service Type field. |
(min) | The Telia server logs the ZyWALL out if the ZyWALL does not log in periodically. |
| Type the number of minutes from 1 to 59 (30 recommended) for the ZyWALL to wait |
| between logins. |
Route | This field refers to the protocol that will be routed by your ZyWALL – IP is the only |
| option for the ZyWALL. |
Edit IP | This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes and press |
| [ENTER] to go to Menu 11.x.2 - Remote Node Network Layer Options. |
Session Options |
|
|
|
Schedules | You can apply up to four schedule sets here. For more details please refer to |
| |
Edit Filter Sets | This field leads to another “hidden” menu. Use [SPACE BAR] to select Yes and |
| press [ENTER] to open menu 11.x.4 to edit the filter sets. See Section 40.5 on page |
| 553 for more details. |
Edit Traffic | Press [SPACE BAR] to select Yes or No. |
Redirect | Select No (default) if you do not want to configure this feature. Select Yes and press |
| [ENTER] to configure Menu 11.1.5 - Traffic Redirect Setup. |
Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press [ESC] at any time to cancel.
Chapter 40 Remote Node Setup | 548 |