ZyWALL 5/35/70 Series User’s Guide
Note: Only one LAN computer can use a trigger port (range) at a time.
Enter 3 in menu 15 to display Menu 15.3 - Trigger Ports. For a ZyWALL with multiple WAN ports, enter 1 or 2 from menu 15.3 to go to Menu 15.3.1 or Menu 15.3.2 - Trigger Port Setup and configure trigger port rules for the first or second WAN port.
Figure 337 Menu 15.3.1: Trigger Port Setup
|
| Menu 15.3.1 - Trigger Port Setup | |
Rule | Name | Incoming | Trigger |
Start Port End Port | Start Port End Port | ||
1. | Real Audio | 6970 | 7170 | 7070 | 7070 |
2. |
| 0 | 0 | 0 | 0 |
3. |
| 0 | 0 | 0 | 0 |
4. |
| 0 | 0 | 0 | 0 |
5. |
| 0 | 0 | 0 | 0 |
6. |
| 0 | 0 | 0 | 0 |
7. |
| 0 | 0 | 0 | 0 |
8. |
| 0 | 0 | 0 | 0 |
9. |
| 0 | 0 | 0 | 0 |
10. |
| 0 | 0 | 0 | 0 |
11. |
| 0 | 0 | 0 | 0 |
12. |
| 0 | 0 | 0 | 0 |
|
| Press ENTER to Confirm or ESC to Cancel: | |||
HTTP:80 FTP:21 | Telnet:23 SMTP:25 | POP3:110 | PPTP:1723 |
| |
The following table describes the fields in this menu.
Table 219 Menu 15.3.1: Trigger Port Setup
FIELD | DESCRIPTION |
|
|
Rule | This is the rule index number. |
|
|
Name | Enter a unique name for identification purposes. You may enter up to 15 characters in this |
| field. All characters are permitted - including spaces. |
Incoming | Incoming is a port (or a range of ports) that a server on the WAN uses when it sends out a |
| particular service. The ZyWALL forwards the traffic with this port (or range of ports) to the |
| client computer on the LAN that requested the service. |
Start Port | Enter a port number or the starting port number in a range of port numbers. |
|
|
End Port | Enter a port number or the ending port number in a range of port numbers. |
|
|
Trigger | The trigger port is a port (or a range of ports) that causes (or triggers) the ZyWALL to |
| record the IP address of the LAN computer that sent the traffic to a server on the WAN. |
Start Port | Enter a port number or the starting port number in a range of port numbers. |
|
|
End Port | Enter a port number or the ending port number in a range of port numbers. |
|
|
Press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press [ESC] at any time to cancel.
Chapter 42 Network Address Translation (NAT) | 576 |