ZyWALL 5/35/70 Series User’s Guide

 

Table 222 Menu 21.1.1.1: TCP/IP Filter Rule

 

 

 

 

FIELD

DESCRIPTION

 

 

 

 

Destination

 

 

 

 

 

IP Addr

Enter the destination IP Address of the packet you wish to filter. This field is ignored

 

 

if it is 0.0.0.0.

 

IP Mask

Enter the IP mask to apply to the Destination: IP Addr.

 

 

 

 

Port #

Enter the destination port of the packets that you wish to filter. The range of this field

 

 

is 0 to 65535. This field is ignored if it is 0.

 

Port # Comp

Press [SPACE BAR] and then [ENTER] to select the comparison to apply to the

 

 

destination port in the packet against the value given in Destination: Port #.

 

 

Options are None, Equal, Not Equal, Less and Greater.

 

 

 

 

Source

 

 

 

 

 

IP Addr

Enter the source IP Address of the packet you wish to filter. This field is ignored if it

 

 

is 0.0.0.0.

 

IP Mask

Enter the IP mask to apply to the Source: IP Addr.

 

 

 

 

Port #

Enter the source port of the packets that you wish to filter. The range of this field is 0

 

 

to 65535. This field is ignored if it is 0.

 

Port # Comp

Press [SPACE BAR] and then [ENTER] to select the comparison to apply to the

 

 

source port in the packet against the value given in Source: Port #.

 

 

Options are None, Equal, Not Equal, Less and Greater.

 

 

 

 

TCP Estab

This field is applicable only when the IP Protocol field is 6, TCP. Press [SPACE

 

 

BAR] and then [ENTER] to select Yes, to have the rule match packets that want to

 

 

establish a TCP connection (SYN=1 and ACK=0); if No, it is ignored.

 

More

Press [SPACE BAR] and then [ENTER] to select Yes or No. If Yes, a matching

 

 

packet is passed to the next filter rule before an action is taken; if No, the packet is

 

 

disposed of according to the action fields.

 

 

If More is Yes, then Action Matched and Action Not Matched will be N/A.

 

 

 

 

Log

Press [SPACE BAR] and then [ENTER] to select a logging option from the following:

 

 

None – No packets will be logged.

 

 

Action Matched - Only packets that match the rule parameters will be logged.

 

 

Action Not Matched - Only packets that do not match the rule parameters will be

 

 

logged.

 

 

Both – All packets will be logged.

 

 

 

 

Action Matched

Press [SPACE BAR] and then [ENTER] to select the action for a matching packet.

 

 

Options are Check Next Rule, Forward and Drop.

 

 

 

 

Action Not

Press [SPACE BAR] and then [ENTER] to select the action for a packet not

 

Matched

matching the rule.

 

 

Options are Check Next Rule, Forward and Drop.

 

 

 

 

When you have Menu 21.1.1.1 - TCP/IP Filter Rule configured, press [ENTER] at the message “Press

 

ENTER to Confirm” to save your configuration, or press [ESC] to cancel. This data will now be

 

displayed on Menu 21.1.1 - Filter Rules Summary.

The following figure illustrates the logic flow of an IP filter.

Chapter 44 Filter Configuration

586