ZyWALL 5/35/70 Series User’s Guide
Figure 27 VPN Wizard: Network Setting
The following table describes the labels in this screen.
Table 16 VPN Wizard : Network Setting
LABEL | DESCRIPTION |
|
|
Network Policy |
|
Property |
|
Active | If the Active check box is selected, packets for the tunnel trigger the ZyWALL to build |
| the tunnel. |
| Clear the Active check box to turn the network policy off. The ZyWALL does not apply |
| the policy. Packets for the tunnel do not trigger the tunnel. |
Name | Type up to 32 characters to identify this VPN network policy. You may use any |
| character, including spaces, but the ZyWALL drops trailing spaces. |
Network Policy |
|
Setting |
|
Local Network | Local IP addresses must be static and correspond to the remote IPSec router's |
| configured remote IP addresses. |
| Select Single for a single IP address. Select Range IP for a specific range of IP |
| addresses. Select Subnet to specify IP addresses on a network by their subnet mask. |
Starting IP | When the Local Network field is configured to Single, enter a (static) IP address on |
Address | the LAN behind your ZyWALL. When the Local Network field is configured to Range |
| IP, enter the beginning (static) IP address, in a range of computers on the LAN behind |
| your ZyWALL. When the Local Network field is configured to Subnet, this is a (static) |
| IP address on the LAN behind your ZyWALL. |
Ending IP | When the Local Network field is configured to Single, this field is N/A. When the |
Address/ | Local Network field is configured to Range IP, enter the end (static) IP address, in a |
Subnet Mask | range of computers on the LAN behind your ZyWALL. When the Local Network field |
| is configured to Subnet, this is a subnet mask on the LAN behind your ZyWALL. |
91 | Chapter 3 Wizard Setup |