ZyWALL 5/35/70 Series User’s Guide

Figure 414 Attaching Rubber Feet

Note: Do not block the ventilation holes. Leave space between ZyWALLs when stacking.

Rack-mounted Installation Requirements

The ZyWALL can be mounted on an EIA standard size, 19-inch rack or in a wiring closet with other equipment. Follow the steps below to mount your ZyWALL on a standard EIA rack using a rack-mounting kit.

Note: Make sure the rack will safely support the combined weight of all the equipment it contains.

Make sure the position of the ZyWALL does not make the rack unstable or top- heavy. Take all necessary precautions to anchor the rack securely before installing the unit.

Use a #2 Philips screwdriver to install the screws.

Note: Failure to use the proper screws may damage the unit.

Rack-Mounted Installation

1Align one bracket with the holes on one side of the ZyWALL and secure it with the bracket screws (smaller than the rack-mounting screws).

2Attach the other bracket in a similar fashion.

669

Appendix B Hardware Installation