ZyWALL 5/35/70 Series User’s Guide
CH A P T E R 45
SNMP Configuration
This chapter explains SNMP configuration menu 22.
45.1 SNMP Configuration
To configure SNMP, enter 22 from the main menu to display Menu 22 - SNMP Configuration as shown next. The “community” for Get, Set and Trap fields is SNMP terminology for password.
Figure 354 Menu 22: SNMP Configuration
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
The following table describes the SNMP configuration parameters.
Table 224 SNMP Configuration Menu Fields
FIELD | DESCRIPTION |
|
|
Get Community | Type the Get community, which is the password for the incoming Get- and GetNext |
| requests from the management station. |
Set Community | Type the Set community, which is the password for incoming Set requests from the |
| management station. |
Trusted Host | If you enter a trusted host, your ZyWALL will only respond to SNMP messages from |
| this address. A blank (default) field means your ZyWALL will respond to all SNMP |
| messages it receives, regardless of source. |
Trap |
|
|
|
Community | Type the Trap community, which is the password sent with each trap to the SNMP |
| manager. |
Chapter 45 SNMP Configuration | 594 |