ZyWALL 5/35/70 Series User’s Guide

 

Table 242 Schedule Set Setup (continued)

 

 

 

 

 

FIELD

DESCRIPTION

 

 

 

 

 

 

Action

Forced On means that the connection is maintained whether or not there is a demand

 

 

call on the line and will persist for the time period specified in the Duration field.

 

 

Forced Down means that the connection is blocked whether or not there is a demand

 

 

call on the line.

 

 

Enable Dial-On-Demandmeans that this schedule permits a demand call on the line.

 

 

Disable Dial-On-Demandmeans that this schedule prevents a demand call on the line.

 

 

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.

Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11 from the Main Menu and then enter the target remote node index. Press [SPACE BAR] and then [ENTER] to select PPPoE in the Encapsulation field to make the schedule sets field available as shown next.

Figure 401 Applying Schedule Set(s) to a Remote Node (PPPoE)

Menu 11.1 - Remote Node

Profile

Rem Node Name= ChangeMe

Route=

IP

Active= Yes

 

 

Encapsulation= PPPoE

Edit IP= No

Service Type= Standard

Telco Option:

Service Name=

Allocated Budget(min)= 0

Outgoing=

Period(hr)= 0

My Login=

Schedules= 1,2,3,4

My Password= ********

Nailed-Up Connection= No

Authen= CHAP/PAP

Session Options:

 

 

Edit

Filter Sets= No

 

Idle

Timeout(sec)= 100

Press ENTER to Confirm or ESC to

Cancel:

 

 

 

You can apply up to four schedule sets, separated by commas, for one remote node. Change the schedule set numbers to your preference(s).

Chapter 51 Call Scheduling

646