ZyWALL 5/35/70 Series User’s Guide

27.7.1 Requirements for Using SSH

You must install an SSH client program on a client computer (Windows or Linux operating system) that is used to connect to the ZyWALL over SSH.

27.8 Configuring SSH

Click ADVANCED, REMOTE MGMT and then the SSH tab to change your ZyWALL’s Secure Shell settings.

Note: It is recommended that you disable Telnet and FTP when you configure SSH for secure connections.

Figure 218 SSH

The following table describes the labels in this screen.

Table 154 SSH

LABEL

DESCRIPTION

 

 

Server Host Key

Select the certificate whose corresponding private key is to be used to identify the

 

ZyWALL for SSH connections. You must have certificates already configured in the

 

My Certificates screen (Click My Certificates and see Chapter 20 on page 338 for

 

details).

Server Port

You may change the server port number for a service if needed, however you must

 

use the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the ZyWALL using

 

this service.

Secure Client IP

A secure client is a “trusted” computer that is allowed to communicate with the

Address

ZyWALL using this service.

 

Select All to allow any computer to access the ZyWALL using this service.

 

Choose Selected to just allow the computer with the IP address that you specify to

 

access the ZyWALL using this service.

Apply

Click Apply to save your customized settings and exit this screen.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

439

Chapter 27 Remote Management