ZyWALL 5/35/70 Series User’s Guide

Figure 227 SNMP

The following table describes the labels in this screen.

Table 158 SNMP

LABEL

DESCRIPTION

 

 

SNMP

 

Configuration

 

Get Community

Enter the Get Community, which is the password for the incoming Get and GetNext

 

requests from the management station. The default is public and allows all requests.

Set Community

Enter the Set community, which is the password for incoming Set requests from the

 

management station. The default is public and allows all requests.

Trap

 

 

 

Community

Type the trap community, which is the password sent with each trap to the SNMP

 

manager. The default is public and allows all requests.

Destination

Type the IP address of the station to send your SNMP traps to.

 

 

SNMP

 

 

 

Service Port

You may change the server port number for a service if needed, however you must

 

use the same port number in order to use that service for remote management.

Service Access

Select the interface(s) through which a computer may access the ZyWALL using this

 

service.

Secure Client IP

A secure client is a “trusted” computer that is allowed to communicate with the

Address

ZyWALL using this service.

 

Select All to allow any computer to access the ZyWALL using this service.

 

Choose Selected to just allow the computer with the IP address that you specify to

 

access the ZyWALL using this service.

Apply

Click Apply to save your customized settings.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

447

Chapter 27 Remote Management