ZyWALL 5/35/70 Series User’s Guide

Table 105 VPN Rules (Manual) Edit (continued)

LABEL

DESCRIPTION

 

 

Local Network

Local IP addresses must be static and correspond to the remote IPSec router's

 

configured remote IP addresses.

 

Two active SAs cannot have the local and remote IP address(es) both the same.

 

Two active SAs can have the same local or remote IP address, but not both. You

 

can configure multiple SAs between the same local and remote IP addresses, as

 

long as only one is active at any time.

Address Type

Use the drop-down list box to choose Single Address, Range Address, or

 

Subnet Address. Select Single Address for a single IP address. Select Range

 

Address for a specific range of IP addresses. Select Subnet Address to specify

 

IP addresses on a network by their subnet mask.

Starting IP

When the Address Type field is configured to Single Address, enter a (static) IP

Address

address on the LAN behind your ZyWALL. When the Address Type field is

 

configured to Range Address, enter the beginning (static) IP address, in a range

 

of computers on the LAN behind your ZyWALL. When the Address Type field is

 

configured to Subnet Address, this is a (static) IP address on the LAN behind your

 

ZyWALL.

Ending IP

When the Address Type field is configured to Single Address, this field is N/A.

Address/Subnet

When the Address Type field is configured to Range Address, enter the end

Mask

(static) IP address, in a range of computers on the LAN behind your ZyWALL.

 

When the Address Type field is configured to Subnet Address, this is a subnet

 

mask on the LAN behind your ZyWALL.

Remote Network

Remote IP addresses must be static and correspond to the remote IPSec router's

 

configured local IP addresses.

 

Two active SAs cannot have the local and remote IP address(es) both the same.

 

Two active SAs can have the same local or remote IP address, but not both. You

 

can configure multiple SAs between the same local and remote IP addresses, as

 

long as only one is active at any time.

Address Type

Use the drop-down list box to choose Single Address, Range Address, or

 

Subnet Address. Select Single Address with a single IP address. Select Range

 

Address for a specific range of IP addresses. Select Subnet Address to specify

 

IP addresses on a network by their subnet mask.

Starting IP

When the Address Type field is configured to Single Address, enter a (static) IP

Address

address on the network behind the remote IPSec router. When the Addr Type field

 

is configured to Range Address, enter the beginning (static) IP address, in a

 

range of computers on the network behind the remote IPSec router. When the

 

Address Type field is configured to Subnet Address, enter a (static) IP address

 

on the network behind the remote IPSec router.

Ending IP

When the Address Type field is configured to Single Address, this field is N/A.

Address/Subnet

When the Address Type field is configured to Range Address, enter the end

Mask

(static) IP address, in a range of computers on the network behind the remote

 

IPSec router. When the Address Type field is configured to Subnet Address,

 

enter a subnet mask on the network behind the remote IPSec router.

Gateway Policy

 

Information

 

329

Chapter 19 VPN Screens