ZyWALL 5/35/70 Series User’s Guide
CH A P T E R 36
Internet Access
This chapter shows you how to configure your ZyWALL for Internet access.
36.1 Introduction to Internet Access Setup
Use information from your ISP along with the instructions in this chapter to set up your ZyWALL to access the Internet. There are three different menu 4 screens depending on whether you chose Ethernet, PPTP or PPPoE Encapsulation. Contact your ISP to determine what encapsulation type you should use.
Note: This menu configures WAN 1 on a ZyWALL with multiple WAN ports. Configure the WAN 2 port in Menu 11.2 - Remote Node Profile or in the WAN WAN 2 screen via the web configurator.
36.2 Ethernet Encapsulation
If you choose Ethernet in menu 4 you will see the next menu.
Figure 286 Menu 4: Internet Access Setup (Ethernet)
Menu 4 - Internet Access Setup
ISP's Name= WAN_1
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Login Server= N/A
Relogin Every (min)= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
Chapter 36 Internet Access | 528 |