ZyWALL 5/35/70 Series User’s Guide

37.3.1 IP Address

From the main menu, enter 5 to open Menu 5 - DMZ Setup to configure TCP/IP (RFC 1155).

Figure 291 Menu 5: DMZ Setup

Menu 5 - DMZ Setup

1.DMZ Port Filter Setup

2.TCP/IP and DHCP Setup

Enter Menu Selection Number:

From menu 5, select the submenu option 2. TCP/IP and DHCP Setup and press [ENTER]. The screen now displays Menu 5.2 - TCP/IP and DHCP Ethernet Setup, as shown next.

Figure 292 Menu 5.2: TCP/IP and DHCP Ethernet Setup

Menu 5.2

- TCP/IP and DHCP Ethernet Setup

DHCP= None

 

TCP/IP Setup:

Client IP Pool:

 

IP Address= 10.10.2.1

Starting Address= N/A

 

Size of Client IP Pool= N/A

IP Subnet Mask= 255.255.255.0

 

 

RIP Direction= None

 

 

Version= N/A

 

 

Multicast= IGMP-v2

 

 

Edit IP Alias= No

DHCP Server Address= N/A

Press ENTER to Confirm or ESC to Cancel:

The DHCP and TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP and DHCP Ethernet Setup. Each public server will need a unique IP address. Refer to Section 35.4 on page 523 for information on how to configure these fields.

Note: DMZ, WLAN and LAN IP addresses must be on separate subnets. You must also configure NAT for the DMZ port (see Chapter 42 on page 558) in menus 15.1 and 15.2.

533

Chapter 37 DMZ Setup