ZyWALL 5/35/70 Series User’s Guide
40.3.2.3 Metric
See Section 7.5 on page 130 for details on the Metric field.
Table 209 Fields in Menu 11.1 (PPPoE Encapsulation Specific)
FIELD | DESCRIPTION |
|
|
Service Name | If you are using PPPoE encapsulation, then type the name of your PPPoE service |
| here. Only valid with PPPoE encapsulation. |
Authen | This field sets the authentication protocol used for outgoing calls. |
| Options for this field are: |
| CHAP/PAP - Your ZyWALL will accept either CHAP or PAP when requested by this |
| remote node. |
| CHAP - accept CHAP only. |
| PAP - accept PAP only. |
Telco Option |
|
|
|
Allocated | The field sets a ceiling for outgoing call time for this remote node. The default for this |
Budget | field is 0 meaning no budget control. |
Period(hr) | This field is the time period that the budget should be reset. For example, if we are |
| allowed to call this remote node for a maximum of 10 minutes every hour, then the |
| Allocated Budget is (10 minutes) and the Period(hr) is 1 (hour). |
Schedules | You can apply up to four schedule sets here. For more details please refer to Chapter |
| |
This field specifies if you want to make the connection to this remote node a | |
Connection | connection. More details are given earlier in this section. |
Session |
|
Options |
|
Idle Timeout | Type the length of idle time (when there is no traffic from the ZyWALL to the remote |
| node) in seconds that can elapse before the ZyWALL automatically disconnects the |
| PPPoE connection. This option only applies when the ZyWALL initiates the call. |
If you change the Encapsulation to PPTP in menu 11.1, then you will see the next screen. Please see Appendix G on page 700 for information on PPTP.
Chapter 40 Remote Node Setup | 550 |