ZyWALL 5/35/70 Series User’s Guide

Figure 241 Reports

Note: Enabling the ZyWALL’s reporting function decreases the overall throughput by about 1 Mbps.

The following table describes the labels in this screen.

Table 167 Reports

LABEL

DESCRIPTION

 

 

Collect Statistics

Select the check box and click Apply to have the ZyWALL record report data.

 

 

Send Raw

Select the check box and click Apply to have the ZyWALL send unprocessed traffic

Traffic Statistics

statistics to a syslog server for analysis.

to Syslog Server

You must have the syslog server already configured in the Log Settings screen.

for Analysis

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

Interface

Select on which interface (LAN, DMZ or WLAN) the logs will be collected. The logs

 

on the DMZ, LAN or WLAN IP alias 1 and 2 are also recorded.

Report Type

Use the drop-down list box to select the type of reports to display.

 

Web Site Hits displays the web sites that have been visited the most often from the

 

LAN and how many times they have been visited.

 

Protocol/Port displays the protocols or service ports that have been used the most

 

and the amount of traffic for the most used protocols or service ports.

 

Host IP Address displays the LAN, DMZ or WLAN IP addresses to and /or from

 

which the most traffic has been sent and how much traffic has been sent to and from

 

those IP addresses.

Refresh

Click Refresh to update the report display. The report also refreshes automatically

 

when you close and reopen the screen.

Flush

Click Flush to discard the old report data and update the report display.

 

 

Note: All of the recorded reports data is erased when you turn off the ZyWALL.

475

Chapter 30 Logs Screens