ZyWALL 5/35/70 Series User’s Guide

The following table describes the labels in this screen.

Table 8 Home: Show Statistics: Line Chart

LABEL

DESCRIPTION

 

 

 

Click the icon to go back to the Show Statistics screen.

 

 

Port

Select the check box(es) to display the throughput statistics of the corresponding

 

port(s).

B/s

Specify the direction of the traffic for which you want to show throughput statistics in

 

this table.

 

Select Tx to display transmitted traffic throughput statistics and the amount of traffic

 

(in bytes). Select Rx to display received traffic throughput statistics and the amount

 

of traffic (in bytes).

Throughput

Set the range of the throughput (in B/s, KB/s or MB/s) to display.

Range

Click Set Range to save this setting back to the ZyWALL.

 

 

 

2.4.6 DHCP Table Screen

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configuration at start-up from a server. You can configure the ZyWALL as a DHCP server or disable it. When configured as a server, the ZyWALL provides the TCP/IP configuration for the clients. If DHCP service is disabled, you must have another DHCP server on your LAN, or else the computer must be manually configured.

Click Show DHCP Table in the HOME screen when the ZyWALL is set to router mode. Read-only information here relates to your DHCP status. The DHCP table shows current DHCP client information (including IP Address, Host Name and MAC Address) of all network clients using the ZyWALL’s DHCP server.

Figure 13 Home : DHCP Table

77

Chapter 2 Introducing the Web Configurator