ZyWALL 5/35/70 Series User’s Guide
4Create another rule in menu 25.1 for this rule to route packets from any host (IP=0.0.0.0 means any host) with protocol TCP and port FTP access through another gateway (192.168.1.100).
Figure 398 IP Routing Policy Example 2
Menu 25.1 - IP | Routing Policy Setup |
|
Rule Index= 2 |
| Active= No |
Criteria: | = 6 |
|
IP Protocol | Packet length= 10 | |
Type of Service= Don't Care | ||
Precedence | = Don't Care | Len Comp= Equal |
Source: | 0.0.0.0 | end= N/A |
addr start= | ||
port start= | 0 | end= N/A |
Destination: | 0.0.0.0 | end= N/A |
addr start= | ||
port start= | 20 | end= 21 |
Action= Matched |
|
|
| |
Gateway | Type= IP Address | Redirect packet= N/A | ||
Gateway | addr | = 192.168.1.100 | ||
Type of | Service= Don't | Care | Log= No | |
Precedence | = Don't | Care | No | |
Edit policy to packets received from= | ||||
|
| Press | ENTER to Confirm or ESC to Cancel: | |
5Select Yes in the LAN field in menu 25.1.1 to apply the policy to packets received on the LAN port.
6Check Menu 25 - IP Routing Policy Summary to see if the rule is added correctly.
Chapter 50 IP Policy Routing | 642 |