ZyXEL Communications ZyWALL5UTM 4.0 41.1 IP Static Route Setup

ZyWALL 5/35/70 Series User’s Guide

CH A P T E R 41

IP Static Route Setup

This chapter shows you how to configure static routes with your ZyWALL.

41.1 IP Static Route Setup

Enter 12 from the main menu. Select one of the IP static routes as shown next to configure IP static routes in menu 12.1.

Note: The first two static route entries are for default WAN1 and WAN2 routes on a ZyWALL with multiple WAN ports; the first static route entry is for the default WAN route on a ZyWALL with a single WAN port. You cannot modify or delete a static default route. The name of the default static route is left blank unless you configure a static WAN IP address.

The route name changes from “default” to “-default” after you change the static WAN IP address to a dynamic WAN IP address, indicating the static route is inactive.

Figure 311 Menu 12: IP Static Route Setup

		Menu 12 - IP Static Route Setup
1.	Reserved	16.	________	31.	________	46.	________
2.	Reserved	17.	________	32.	________	47.	________
3.	________	18.	________	33.	________	48.	________
4.	________	19.	________	34.	________	49.	________
5.	________	20.	________	35.	________	50.	________
6.	________	21.	________	36.	________
7.	________	22.	________	37.	________
8.	________	23.	________	38.	________
9.	________	24.	________	39.	________
10.	________	25.	________	40.	________
11.	________	26.	________	41.	________
12.	________	27.	________	42.	________
13.	________	28.	________	43.	________
14.	________	29.	________	44.	________
15.	________	30.	________	45.	________
Enter selection		number:

Now, enter the index number of the static route that you want to configure.

Chapter 41 IP Static Route Setup 556