ZyWALL 5/35/70 Series User’s Guide

Figure 381 Menu 24.7.1 As Seen Using the Console Port

Menu 24.7.1 - System Maintenance - Upload System Firmware

To upload system firmware:

1.Enter "y" at the prompt below to go into debug mode.

2.Enter "atur" after "Enter Debug Mode" message.

3.Wait for "Starting XMODEM upload" message before activating Xmodem upload on your terminal.

4.After successful firmware upload, enter "atgo" to restart the router.

Warning: Proceeding with the upload will erase the current system firmware.

Do You Wish To Proceed:(Y/N)

2After the "Starting Xmodem upload" message appears, activate the Xmodem protocol on your computer. Follow the procedure as shown previously for the HyperTerminal program. The procedure for other serial communications programs should be similar.

47.5.9Example Xmodem Firmware Upload Using HyperTerminal

Click Transfer, then Send File to display the following screen.

Figure 382 Example Xmodem Upload

After the firmware upload process has completed, the ZyWALL will automatically restart.

47.5.10Uploading Configuration File Via Console Port

1Select 2 from Menu 24.7 – System Maintenance – Upload Firmware to display Menu 24.7.2 - System Maintenance - Upload System Configuration File. Follow the instructions as shown in the next screen.

621

Chapter 47 Firmware and Configuration File Maintenance