ZyWALL 5/35/70 Series User’s Guide

Table 289 IKE Logs (continued)

LOG MESSAGE

 

DESCRIPTION

 

 

 

 

Rule [%d]

Phase 2

 

The listed rule’s IKE phase 2 authentication algorithm did not

authentication algorithm

match between the router and the peer.

mismatch

 

 

 

Rule [%d]

Phase 2

 

The listed rule’s IKE phase 2 encapsulation did not match

encapsulation mismatch

between the router and the peer.

Rule [%d]> Phase 2 pfs

The listed rule’s IKE phase 2 perfect forward secret (pfs)

mismatch

 

 

setting did not match between the router and the peer.

Rule [%d] Phase 1

ID mismatch

The listed rule’s IKE phase 1 ID did not match between the

 

 

 

router and the peer.

Rule [%d]

Phase 1

hash

The listed rule’s IKE phase 1 hash did not match between the

mismatch

 

 

router and the peer.

Rule [%d]

Phase 1

preshared

The listed rule’s IKE phase 1 pre-shared key did not match

key mismatch

 

between the router and the peer.

Rule [%d]

Tunnel built

The listed rule’s IPSec tunnel has been built successfully.

successfully

 

 

Rule [%d]

Peer's public key

The listed rule’s IKE phase 1 peer’s public key was not found.

not found

 

 

 

Rule [%d]

Verify peer's

The listed rule’s IKE phase 1verification of the peer’s

signature

failed

 

signature failed.

Rule [%d] Sending IKE request

IKE sent an IKE request for the listed rule.

Rule [%d]

Receiving IKE

IKE received an IKE request for the listed rule.

request

 

 

 

Swap rule

to rule [%d]

The router changed to using the listed rule.

Rule [%d] Phase 1

key length

The listed rule’s IKE phase 1 key length (with the AES

mismatch

 

 

encryption algorithm) did not match between the router and

 

 

 

the peer.

Rule [%d] phase 1

mismatch

The listed rule’s IKE phase 1 did not match between the router

 

 

 

and the peer.

Rule [%d] phase 2

mismatch

The listed rule’s IKE phase 2 did not match between the router

 

 

 

and the peer.

Rule [%d] Phase 2

key length

The listed rule’s IKE phase 2 key lengths (with the AES

mismatch

 

 

encryption algorithm) did not match between the router and

 

 

 

the peer.

Remote Gateway Addr in rule

The IP address for the domain name of the peer gateway in

[%s] is changed to %s"

the listed rule changed to the listed IP address.

New My ZyWALL Addr in rule

The IP address for the domain name of the ZyWALL in the

[%s] is changed to %s

listed rule changed to the listed IP address.

Remote Gateway Addr has

The listed tunnel will be deleted because the remote

changed, tunnel [%s] will be

gateway’s IP adress changed.

deleted

 

 

 

My ZyWALL Addr has changed,

The listed tunnel will be deleted because the ZyWALL’s IP

tunnel [%s] will be deleted

address changed.

781

Appendix S Log Descriptions