ZyWALL 5/35/70 Series User’s Guide
Figure 69 DMZ: Port Roles
The following table describes the labels in this screen.
Table 48 DMZ: Port Roles
LABEL | DESCRIPTION |
|
|
LAN | Select a port’s LAN radio button to use the port as part of the LAN. The port will |
| use the LAN IP address and MAC address. |
DMZ | Select a port’s DMZ radio button to use the port as part of the DMZ. The port will |
| use the DMZ IP address and MAC address. |
WLAN | When you have the wireless card set to WLAN, you can select a port’s WLAN |
| radio button to use the port as part of the WLAN. |
| The port will use the ZyWALL’s WLAN IP address and the MAC address of the |
| WLAN card. |
| Note: You must install a wireless card to use the WLAN port role. |
| See Appendix A on page 660 for how to install a WLAN card. |
Wireless Card | Select LAN to use the wireless card as part of the LAN. |
| Select DMZ to use the wireless card as part of the DMZ. |
| Select WLAN to use the wireless card as part of the WLAN. |
| The ZyWALL restarts after you change the wireless card setting. |
| Note: If you set the wireless card to be part of the LAN or DMZ, you |
| can still use wireless access, but not the WLAN interface in |
| the firewall. The firewall will treat the wireless card as part of |
| the LAN or DMZ respectively. |
Apply | Click Apply to save your changes back to the ZyWALL. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
Chapter 8 DMZ Screens | 168 |