ZyWALL 5/35/70 Series User’s Guide
Table 49 WLAN (continued)
LABEL | DESCRIPTION |
|
|
Allow between | Select this check box to forward NetBIOS packets from the LAN to the DMZ and |
WLAN and DMZ | from the DMZ to the WLAN. If your firewall is enabled with the default policy set to |
| block DMZ to WLAN traffic, you also need to enable the default DMZ to WLAN |
| firewall rule that forwards NetBIOS traffic. |
| Clear this check box to block all NetBIOS packets going from the WLAN to the DMZ |
| and from the DMZ to the WLAN. |
Apply | Click Apply to save your changes back to the ZyWALL. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
9.3 WLAN Static DHCP
This table allows you to assign IP addresses on the WLAN to specific individual computers based on their MAC addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
To change your ZyWALL’s WLAN static DHCP settings, click NETWORK, WLAN and then the Static DHCP tab. The screen appears as shown.
173 | Chapter 9 Wireless LAN |