ZyWALL 5/35/70 Series User’s Guide

Figure 263 Initial Screen

Copyright (c) 1994 - 2004 ZyXEL Communications Corp.

initialize ch =0, ethernet address: 00:A0:C5:01:23:45

initialize ch =1, ethernet address: 00:A0:C5:01:23:46

initialize ch =2, ethernet address: 00:A0:C5:01:23:47

initialize ch =3, ethernet address: 00:A0:C5:01:23:48

initialize ch =4, ethernet address: 00:00:00:00:00:00 AUX port init . done

Modem init . inactive

Press ENTER to continue...

32.2.2 Entering the Password

The login screen appears after you press [ENTER], prompting you to enter the password, as shown below.

For your first login, enter the default password “1234”. As you type the password, the screen displays an “X” for each character you type.

Please note that if there is no activity for longer than five minutes after you log in, your ZyWALL will automatically log you out and display a blank screen. If you see a blank screen, press [ENTER] to bring up the login screen again.

Figure 264 Password Screen

Enter Password : XXXX

32.3 Navigating the SMT Interface

The SMT is an interface that you use to configure your ZyWALL.

Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.

Table 181 Main Menu Commands

OPERATION

KEYSTROKES

DESCRIPTION

 

 

 

Move down to

[ENTER]

To move forward to a submenu, type in the number of the desired

another menu

 

submenu and press [ENTER].

Move up to a

[ESC]

Press the [ESC] key to move back to the previous menu.

previous

 

 

menu

 

 

497

Chapter 32 Introducing the SMT