|
| ZyWALL 5/35/70 Series User’s Guide |
| Table 68 Default Rule (Bridge Mode) | |
|
|
|
| LABEL | DESCRIPTION |
|
|
|
| Log Broadcast | Select the check box to create a log for any Layer 2 broadcast frames that are |
| Frame | traveling in the selected direction. |
| Apply | Click Apply to save your changes back to the ZyWALL. |
|
|
|
| Reset | Click Reset to begin configuring this screen afresh. |
|
|
|
11.8 Firewall Rule Summary
Click SECURITY, FIREWALL, then the Rule Summary tab to open the screen. This screen displays a list of the configured firewall rules.
Note: The ordering of your rules is very important as rules are applied in turn.
Figure 98 Rule Summary
The following table describes the labels in this screen.
Table 69 Rule Summary
LABEL | DESCRIPTION |
|
|
Firewall Rules | This bar displays the percentage of the ZyWALL’s firewall rules storage space that is |
Storage Space | currently in use. The bar turns from green to red when the maximum is being |
in Use | approached. When the bar is red, you should consider deleting unnecessary firewall |
| rules before adding more firewall rules. |
Packet Direction | Use the |
| ZyWALL, LAN to WAN, LAN to DMZ, LAN to WLAN, WAN to LAN, WAN to WAN/ |
| ZyWALL, WAN to DMZ, WAN to WLAN, DMZ to LAN, DMZ to WAN, DMZ to |
| DMZ/ZyWALL, DMZ to WLAN, WLAN to LAN, WLAN to WAN, WLAN to DMZ or |
| WLAN to WLAN/ZyWALL) for which you want to configure firewall rules. |
Default Policy | This field displays the default action and log policy you selected in the Default Rule |
| screen for the packet direction shown in the field above. |
Chapter 11 Firewall Screens | 218 |