ZyWALL 5/35/70 Series User’s Guide
CH A P T E R 39
Wireless Setup
Use menu 7 to set up your ZyWALL as the wireless access point.
39.1 Wireless LAN Setup
Note: If you are configuring the ZyWALL from a computer connected to the wireless LAN and you change the ZyWALL’s ESSID or WEP settings, you will lose your wireless connection when you press [ENTER] to confirm. You must then change the wireless settings of your computer to match the ZyWALL’s new settings.
From the main menu, enter 7 to open Menu 7 - WLAN Setup to configure the Wireless LAN setup. To edit the wireless LAN configuration, enter 1 to open Menu 7.1 - Wireless Setup as shown next.
Figure 298 Menu 7.1: Wireless Setup
Menu 7.1 - Wireless Setup
Enable Wireless LAN= No
Bridge Channel= WLAN
ESSID= ZyXEL
Hide ESSID= No
Channel ID= CH06 2437MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Edit MAC Address Filter= No
Press ENTER to Confirm or ESC to Cancel:
Note: The settings of all client stations on the wireless LAN must match those of the ZyWALL.
Chapter 39 Wireless Setup | 540 |