ZyWALL 5/35/70 Series User’s Guide

Figure 288 Internet Access Setup (PPPoE)

Menu 4 - Internet Access Setup

ISP's Name= WAN_1

Encapsulation= PPPoE

Service Type= N/A

My Login=

My Password= ********

Retype to Confirm= ********

Idle Timeout= 100

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Address= N/A

Network Address Translation= SUA Only

Press ENTER to Confirm or ESC to Cancel:

The following table contains instructions about the new fields when you choose PPPoE in the Encapsulation field in menu 4.

Table 202 New Fields in Menu 4 (PPPoE) screen

FIELD

DESCRIPTION

 

 

Encapsulation

Press [SPACE BAR] and then press [ENTER] to choose PPPoE. The encapsulation

 

method influences your choices in the IP Address field.

Idle Timeout

This value specifies the time in seconds that elapses before the ZyWALL

 

automatically disconnects from the PPPoE server.

If you need a PPPoE service name to identify and reach the PPPoE server, please go to menu 11 and enter the PPPoE service name provided to you in the Service Name field.

36.5 Basic Setup Complete

Well done! You have successfully connected, installed and set up your ZyWALL to operate on your network as well as access the Internet.

Note: When the firewall is activated, the default policy allows all communications to the Internet that originate from the LAN, and blocks all traffic to the LAN that originates from the Internet.

You may deactivate the firewall in menu 21.2 or via the ZyWALL embedded web configurator. You may also define additional firewall rules or modify existing ones but please exercise extreme caution in doing so. See the chapters on firewall for more information on the firewall.

531

Chapter 36 Internet Access