ZyWALL 5/35/70 Series User’s Guide
Figure 276 Menu 11.3: Remote Node Profile (Backup ISP)
Menu 11.3 - Remote Node Profile (Backup ISP)
Rem Node Name= | Edit PPP Options= No | |
Active= No | Edit IP= No | |
Outgoing: | ||
Edit Script Options= No | ||
My Login= ChangeMe | Telco Option: | |
My Password= ******** | ||
Retype to Confirm= ******** | Allocated Budget(min)= 0 | |
Authen= CHAP/PAP | Period(hr)= 0 | |
Pri Phone #= 0 | Schedules= | |
Sec Phone #= | Always On= No | |
| Session Options: | |
| Edit Filter Sets= No | |
| Idle Timeout(sec)= 100 |
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this menu.
Table 193 Menu 11.3: Remote Node Profile (Backup ISP)
FIELD | DESCRIPTION | |
|
| |
Rem Node | Enter a descriptive name for the remote node. This field can be up to eight characters. | |
Name |
| |
Active | Press [SPACE BAR] and then [ENTER] to select Yes to enable the remote node or | |
| No to disable the remote node. | |
Outgoing |
| |
|
| |
My Login | Enter the login name assigned by your ISP for this remote node. | |
|
| |
My Password | Enter the password assigned by your ISP for this remote node. | |
|
| |
Retype to | Enter your password again to make sure that you have entered is correctly. | |
Confirm |
| |
Authen | This field sets the authentication protocol used for outgoing calls. | |
| Options for this field are: | |
| CHAP/PAP - Your ZyWALL will accept either CHAP or PAP when requested by this | |
| remote node. | |
| CHAP - accept CHAP only. | |
| PAP - accept PAP only. | |
|
| |
Pri Phone # | Enter the first (primary) phone number from the ISP for this remote node. If the | |
Sec Phone # | Primary Phone number is busy or does not answer, your ZyWALL dials the | |
Secondary Phone number if available. Some areas require dialing the pound sign # | ||
| ||
| before the phone number for local calls. Include a # symbol at the beginning of the | |
| phone numbers as required. | |
Edit PPP | Move the cursor to this field and use the space bar to select [Yes] and press [Enter] to | |
Options | edit the PPP options for this remote node. This brings you to Menu 11.3.1 - Remote | |
| Node PPP Options (see Section 34.7 on page 516). |
515 | Chapter 34 WAN and Dial Backup Setup |