ZyWALL 5/35/70 Series User’s Guide

11.3.3.2 Service

Select the service from the Service scrolling list box. If the service is not listed, it is necessary to first define it. See Section 11.11.2 on page 229 for more information on predefined services.

11.3.3.3 Source Address

What is the connection’s source address; is it on the LAN, DMZ, WLAN or WAN? Is it a single IP, a range of IPs or a subnet?

11.3.3.4 Destination Address

What is the connection’s destination address; is it on the LAN, DMZ, WLAN or WAN? Is it a single IP, a range of IPs or a subnet?

11.4 Connection Direction Examples

This section describes examples for firewall rules for connections going from LAN to WAN and from WAN to LAN. Rules for the WLAN or DMZ work in a similar fashion.

LAN to LAN/ZyWALL, WAN to WAN/ZyWALL, WLAN to WLAN/ZyWALL and DMZ to DMZ/ZyWALL rules apply to packets coming in on the associated interface (LAN, WAN, WLAN, or DMZ respectively). LAN to LAN/ZyWALL means policies for LAN-to-ZyWALL (the policies for managing the ZyWALL through the LAN interface) and policies for LAN-to- LAN (the policies that control routing between two subnets on the LAN). Similarly, WAN to WAN/ZyWALL, WLAN to WLAN/ZyWALL and DMZ to DMZ/ZyWALL polices apply in the same way to the WAN and DMZ ports.

11.4.1 LAN To WAN Rules

The default rule for LAN to WAN traffic is that all users on the LAN are allowed non- restricted access to the WAN. When you configure a LAN to WAN rule, you in essence want to limit some or all users from accessing certain services on the WAN. See the following figure.

213

Chapter 11 Firewall Screens