IMPORTANT SAFETY INSTRUCTIONS
Read through all the instructions before starting to use the air- conditioner. Keep this manual in a safe place for future reference.
1.Supervision is needed when the air-conditioner is used anywhere near children. This appliance is not intended for use by children or other persons without assistance or supervision if their physical, sensory or mental capabilities prevent them from using it safely.
2.Do not use the air-conditioner outdoors.
3.Stand the air-conditioner upright on a firm, even surface. Make sure it is standing securely so that it cannot tilt or fall over. Water can damage furniture and floor coverings.
4.Unwind the power cord completely. An incompletely unwound power cord can lead to overheating and cause a fire.
5.If the power cord of the air-conditioner is damaged, it must be repaired by a workshop that is approved by the manufacturer, as special tools are needed.
6.Do not use an extension cord or a variable speed controller. This can lead to overheating, fire or electric shock.
7.Only connect the air-conditioner with a single-phase earthed power socket with the current stipulated on the type plate.
8.Switch the air-conditioner off and always pull the power plug out of the power socket when the air-conditioner is not in use, or when it is moved, handled or cleaned. Do not tug at the cord when disconnecting the power plug.
9.The air-conditioner functions best at room temperatures of up to 35°C.
10.Do not use the air-conditioner near easily inflammable gases or materials, near an open fire, or in a location where oil or water could splash. Do not spray insecticides or similar substances onto the air-conditioner. Make sure that the air-conditioner is not exposed to direct sunshine. Do not operate the air-conditioner in a hothouse or a laundry, or near a bathtub, a shower or a swimming- pool.
11.Do not use the air-conditioner outdoors. The air-conditioner is intended only for domestic use indoors, in accordance with the user manual, and is not intended for industrial use.
12.Before starting to operate the air-conditioner, make sure that the air intakes (3, 8) and air outlet (1) are open. The air-conditioner must not be positioned behind curtains or drapes, or behind other objects or obstacles which could hinder the air circulation. Make sure that no objects can get into the air intakes (3, 8) and air outlet (1), as this can lead to overheating, fire or electric shock.
13.Do not direct the air outlet (1) directly towards people, plants, pets, walls, furnishings or objects.
14.Do not pull the power plug out of the power socket when the air-conditioner is in use. First press the power button to the
OFF position.
15.After switching the air-conditioner off, wait for 3-5 minutes before switching it back on again, as the compressor could otherwise be damaged.
16.Do not immerse the air-conditioner in water or any other liquids and do not pour water or any other liquids over the unit or into the air intake (8) or air outlet (1).
17.Clean the air-conditioner regularly by following the cleaning instructions.
ENGLISH
18.When you take the air filter out of the air-conditioner, make sure that you do not touch any metal parts. These are sharp-edged and could cause injury. Do not use the air-conditioner when the air filter and air intakes (3, 8) are not installed.
19.If the power cord of the air-conditioner is damaged, it must be repaired by a workshop that is approved by the manufacturer, as special tools are needed.
20.Always transport the air-conditioner in an upright position.
If this is not possible, lay the unit on its side and stand it upright as soon as you reach your destination. Wait at least 4 hours after transporting the unit before starting to use it.
21.Do not operate the air-conditioner if it is damaged or looks as if it might be damaged, or if it is not working properly. Pull the power plug out of the power socket.
COMPONENTS
1.Air Outlet
2.Control Panel
3.Evaporator Air Intake
4.Air Outlet Hose
5.Casters
6.Power Supply with Plug
7.Drainage Pipe
8.Air Intake
9.Exhaust Nozzle
10.Exhaust Nozzle Connector (2 pcs.)
11.Exhaust Hose
12. Flange Accessory Fixture
13.Window Connector Cap
WARNINGS
1.All wiring must comply with local and national electrical codes and be installed by a qualified electrician If you have any questions regarding the following instructions, contact a qualified electrician.
2.Check available power supply and resolve any wiring problems before installation and operation of this unit.
3.For your safety and protection, this unit is grounded through the power cord plug when plugged into a matching wall outlet. If you are not sure whether the wall outlets in your home are properly grounded, please consult a electrician. Do not use plug adapters or extension cords with this unit. If it is necessary to use an extension cord with extension cord only ( available at most local hardware stores).
INSTALLATION INSTRUCTIONS
Connect exhaust hose assembly to the back of the unit. Extend hose to desired length and locate the exhaust nozzle through the window for ventilation (Fig. 1).
Exhaust Duct Set Assembly and Installation
1.Insert ends of exhaust hose (11) into exhaust nozzle connector (10) by twisting counter-clockwise until it stops.
2.Attach one exhaust nozzle connector (10) onto the rear outlet of the unit. This is achieved by sliding the exhaust nozzle connector of hose downward over the exhaust outlet of unit (4) ensuring that
