Apple 8100/80AV manual Chapter

Then follow these steps:

1Assemble the VCR, television, microphone, and cables you need.

Be sure to use a microphone designed for your model of the Macintosh, such as the Apple PlainTalk Microphone.

You need the following cables (available at an electronics supply store): m Video cable with S-video connectors or RCA plugs at each end.

S-video S-video

Adapter for composite video

RCA RCA S-video

mAudio cable with dual RCA plugs at one end and a stereo miniplug at the other end, or dual RCA plugs at each end.

RCA

Stereo miniplug

mA cable to connect your TV to your VCR.

You can also use an all-in-one cable (with one video and two audio RCA plugs at each end) if you attach appropriate adapters.

IMPORTANT A Y-shaped adapter is supplied with the round microphone for some models of the Macintosh. This adapter is not compatible with your Macintosh.

2Attach one end of the video cable to the Video In socket on the VCR (follow the directions that came with the VCR).

3Plug the other end of the video cable (or adapter) into the S-video output port on the Macintosh.

If the connector doesn’t slide easily into the port, realign it and try again. Forcing a connector into the port could damage the computer or cable.

106 Chapter 8