104 OL-30824-01
Front Pane l L ED St a tus Indicator Functions
Normal Operations (AC Power applied)
The following chart illustra tes the app earance of the resident ial gatewa y front panel
LED status indicators during normal op erations w hen AC pow er is applied to the
gateway.
Front Panel LE D Status Indicator s During No rmal Conditions
Front Pa nel
Indica tor
Normal Operations
1 POWER On
2 DS On
3 US On
4 ONLINE On
5 ETHERNET
1 - 4
On - When a single device is connected to the Ethernet port an d no data
is bei ng sent to or from the modem
Blinks - When only one Ethernet device is connected and data is being
transferred between the consumer premise equipment (CPE) and the
wireless home gateway
Off - When no devices are connected to the Ethernet ports
6 USB
On - When a single device is connected to the USB port and no data is
bein g sent to or from the modem
Blinks - When only one USB device is connected and data is being
transferred between the consumer premise equipment (CPE) and the
wireless home gateway
Off - When no devices are connected to the USB por ts
7 WIRELESS
LINK
On - When the wireless access point is enabled and operational
Blinks - When data is being transferred between the CPE and the
wireless home gateway
Off - When the wireless access point is disabled by the user
8 WIRELESS
SETUP
Off - Wh en wireless setup is not active
Blinks -
When wireless setup is active to add new wireless clients on the
wireless network
9 TEL 1
On - When telephony service is enabled
Blinks - When line 1 is in use
10 TEL 2
On - When telephony service is enabled
Blinks - When line 2 is in use