Cisco Systems 4034784, 4034785 National Restrictions

IMPORTANT SAFETY INSTRUCTIONS

12 4021193 Rev C

Note: Th e full declar ation of confor mity for this product can be found in the Declarati ons of

Conformi ty and Regul atory Information section of the appropriat e product hardwa re

installation guide, which is available on Cisco.com.

The following standards were applied during the assessment of the product ag ainst the

requirements of the Directive 1999/5/EC:

 Radio: EN 300 328

 EMC: EN 301 489-1 and EN 301 489-17

 Safety: EN 60950 and EN 50385

The CE mark and class-2 identifier are affixed to the product and its packaging. This product

conforms to the followi ng Europ ean dire ctives:

-1999/5/EC

National Restrictions

This product is for ind oor use only.

For 2.4 G Hz, the output power is restricted to 10 mW EIRP when the product is used

outdoors in the band 2454 - 2483, 5 MHz. There are no restrictions when used in other parts

of the 2.4 GHz band. Check http://www.arcep.fr/ for more details.

Pour la bande 2,4 GHz, la puissance est limitée à 10 mW en p.i.r.e. pour les équipements

utilisés en extérieur dans la b ande 2454 - 2483,5 MHz. Il n'y a pas de restrictions pour des

utilisations dans d'autres parties de la bande 2,4 GHz. Consultez http://www.arcep.fr/ pour

de plus amples détails.

This product meets the National Radio Interface and the requirements specified in the

National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating

within the boundaries of the owner's property, its use requires a “general authorization.”

Please check http:/ /www.comunicaz ioni.i t/it/ for more de tails.

Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano

Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all 'interno del

proprio fondo, l'utilizzo di prodotti Wireless LAN richiede una “Autorizzazione Generale”.

Consultare http:/ /www.comunicaz ioni.i t/it/ per maggiori dettagl i.

The outdoor usage of the 2. 4 GHz band requires an authorization from the Electron ic

Communications Office. Please check http://www.esd.lv for more details.

2,4 GHz frekven?u joslas izmantošanai ?rpus telp?m nepieciešama at?auja no Elektronisko

sakaru direkcijas. Vair?k inform?cijas: http://www.esd.lv.

Note: The regulatory lim its for maximum output power are specified in EIRP. The EIRP level

of a device can be calculated by adding the gain of the antenna used (specified in dBi) to the

output power available at the connector (specified in dBm).