Cisco Systems SCE 2000 4/8xFE manual Starting the SCE 2000 Platform

C H A P T E R 7

Basic SCE 2000 Platform Operations

This chapter describes how to start up the SCE 2000 platform, reboot, and shutdown. It also describes how to manage configurations.

This chapter contains the following sections:
•	Starting the SCE 2000 Platform 7-1
•	Managing SCE 2000 Configurations	7-4
•	Performing Complex Configurations	7-7

•Displaying the SCE Platform Version Information7-8

•	Displaying the SCE Platform Inventory 7-9
•	Displaying the System Uptime	7-10

•Rebooting and Shutting Down the SCE Platform 7-10

Starting the SCE 2000 Platform

The procedures for starting the SCE 2000 platform are explained in the following sections:

•Checking Conditions Prior to System Startup (on page 7-1)

•Starting the System and Observing Initial Conditions (on page 7-2)

Checking Conditions Prior to System Startup

Check the following conditions before you start your SCE 2000 platform:

•Both power supply units are installed and connected

•First-time startup at installation:

•SCE 2000 platform connected to local console (CON port)

•The console terminal is turned on and properly configured

•Subsequent startups

•Line and Cascade interfaces are properly cabled (optional)

Cisco SCE 2000 4/8xFE Installation and Configuration Guide

OL-7826-05 7-1