Cisco Systems SCE 2000 4/8xFE manual Viewing the User Log Counters

Chapter 8 Troubleshooting

Troubleshooting Tools

Step 2 The system asks Are you sure?

Step 3 Type Y and press Enter.

The SCE 2000# prompt appears.

Viewing the User Log Counters

There are two types of log counters:

•User log counters — count the number of system events logged from the SCE platform last reboot.

•Non-volatile counters — are not cleared during boot time

To view the user log counters for the current session, use the following command:

From the SCE 2000# prompt, type show logger device user-file-log counters and press Enter.

The logger lines information appears, followed by the SCE 2000# prompt.

To view the non-volatile logger counters for both the User log file and the debug log file, use the following command:

From the SCE 2000# prompt, type show logger nv-countersand press Enter.

The non-volatile log counter information appears, followed by the SCE 2000# prompt.

To view the non-volatile counter for the user-file-log only, use the following command:

From the SCE 2000# prompt, type show logger device user-file-log nv- counters and press Enter.

The user-file-log non-volatile log counter information appears, followed by the SCE 2000# prompt.

Cisco SCE 2000 4/8xFE Installation and Configuration Guide

8-6 OL-7826-05