Cisco Systems SCE 2000 4/8xFE manual Tools and Parts Required, Dimension Measurement

Chapter 4 Installation and Maintenance

Preparing to Install the SCE 2000 Platform

Figure 4-1: SCE Platform Dimensions

Table 4-1	SCE 2000 Dimensions
Dimension		Measurement
Height		3.47 inches (9.5 cm)
Width		17.4 inches (4.43 cm)
Depth		18 inches (4.6 cm)
Weight		33 lb (15 kg)

Tools and Parts Required

The SCE 2000 chassis is fully assembled at the factory, including the application and software packages. No assembly is required. However, you need the following tools and equipment to install the SCE 2000 chassis and the rack-mount kit (if installing the SCE 2000 platform in a rack), fan modules, and power supplies:

•Number 1 and 2 Phillips screwdriver

•1/4 inch flat-blade screwdriver

•#¼” Hex Wrench

•Screws compatible with your rack (for mounting the SCE 2000 to the rack)

•12 AWG or 2.5-mm copper installation wire with hex or loop connectors for DC power leads Ring terminals must be UL approved and suitable for 12 AWG wire.

•Level (optional)

•Tape measure (optional)

•Appropriate cables to connect the SCE 2000 to the network and console terminal

•Rack-mounting kit (optional)

•A new AC-input or DC-input power supply

•A new fan module

Cisco SCE 2000 4/8xFE Installation and Configuration Guide

4-2 OL-7826-05