Cisco Systems SCE 2000 4/8xFE manual Saving the Configuration Settings

Chapter 7 Basic SCE 2000 Platform Operations

Managing SCE 2000 Configurations

flow-aging default-timeout UDP 60 interface FastEthernet 0/0

ip address 10.1.5.109 255.255.0.0 interface FastEthernet 0/1 interface FastEthernet 0/2

exit

line vty 0 4 no timeout exit

SCE 2000#

Saving the Configuration Settings

When you make changes to the current running configuration and you want those changes to continue to be valid when the system restarts, you must save the changes before leaving the management session, that is, you must save the running configuration to the startup configuration file.

The SCE platform provides multiple interfaces for the purpose of configuration and management. All interfaces supply an API to the same database of the SCE platform and any configuration made through one interface is reflected through all interfaces. Furthermore, when saving the running configuration to the startup configuration from any management interface, all configuration settings are saved regardless of the management interface used to set the configuration.

To save configuration changes, complete the following steps:

Step 1 At the SCE 2000# prompt, type show running-configto view the running configuration. The running configuration is displayed.

Step 2 Check the displayed configuration to make sure that it is set the way you want. If not, make the changes you want before saving.

Step 3 Type copy running-config startup-config.

The system saves all running configuration information to the configuration file, which is used when the system reboots.

The configuration file holds all information that is different from the system default in a file called config.txt located in the directory: tffs0:system.

EXAMPLE:

The following example shows the running configuration file.

SCE 2000#show running-config

#This is a general configuration file (running-config). #Created on 15:50:56 CET MON February 11 2006 #cli-type 1

#version 1

clock timezone CET 1

Cisco SCE 2000 4/8xFE Installation and Configuration Guide

OL-7826-05 7-5