Chapter 7 Basic SCE 2000 Platform Operations
Managing SCE 2000 Configurations
Logger device
Total info messages: 1
Total warning messages: 0
Total error messages: 0
Total fatal messages: 0
If there are “Total error messages” or “Total fatal messages”, use the show logger device
Managing SCE 2000 Configurations
The procedures for managing SCE 2000 configurations are explained in the following sections:
•Viewing Configuration (on page
•Saving the Configuration Settings (on page
•Recovering a Previous Configuration (on page
Viewing Configuration
When you enter configuration commands, it immediately effects the SCE platform operation and configuration. This configuration, referred to as the
The SCE platform provides commands for:
•Viewing the running configuration
•Viewing the startup configuration
After configuring the SCE platform, you may query for the running configuration using the command show
To view the running configuration, use the following command:
At the SCE 2000# prompt, type show
The system shows the running configuration.
SCE 2000#show running-config
#This is a general configuration file
|
| #Created on | 15:50:56 CET MON December 11 2005 | |
|
|
|
| |
|
| #version 1 |
|
|
|
| clock timezone CET 1 | ||
|
| community “public” ro | ||
|
| host 10.1.1.253 traps version 1 “public” | ||
|
| interface LineCard 0 | ||
|
| |||
|
| no silent |
|
|
|
| no shutdown |
|
|
|
| Cisco SCE 2000 4/8xFE Installation and Configuration Guide | ||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
