Cisco Systems SCE 2000 4/8xFE manual Port Quantity Description Connect This Port To…

Chapter 2 Introduction to the SCE Platform

Front Panel

Figure 2-1: SCE Platform Front Panel

Table 2-2	SCE 2000 Ports
Port	Quantity	Description	Connect This Port To…
Mng1/	2	10/100/1000 Ethernet RJ-45 ports for	A LAN using an FE cable
Mng2		management of the SCE 2000.	with an RJ-45 connector.
		CLI designation: interface Management	If both interfaces are used to
		0/1, 0/2.	provide a redundant
			management interface,
			connect both ports to the LAN
			via a switch.
Console	1	RS-232 RJ-45 port for use by technicians	A local terminal (console)
			using an RS-232 cable with
			an RJ-45 connector, as
			provided in the SCE 2000 kit.
AUX	1	RS-232 RJ-45 port used by technicians
FE-1	4	FastEthernet RJ-45 ports for connecting	Refer to Connecting the Line
SUB/NET		to the line and/or cascading two devices	Ports ("Connecting the line
FE-2		CLI designation: interface FastEthernet	ports to the network" on page
			6-1) for cabling diagrams for
SUB/NET		0/1 through 0/4
			various topologies
FE-3	4	FastEthernet RJ-45 ports for future use.
SUB/NET		These ports currently have no software
FE-4		support.
SUB/NET

Cisco SCE 2000 4/8xFE Installation and Configuration Guide

2-2 OL-7826-05