Chapter 4 Configuring the CiscoWorks 1105 and 1130 WLSE
Setting Up Device Management
Enter SNMP Community Strings for All Managed Devices
SNMP community strings are used for discovering and communicating with network devices. The community string must be set on each device, as described in Setting Up Devices, page
Note If you are importing devices, you do not need to enter their community strings. For more information, see Import Devices, page
To enter community strings:
Step 1 Select Devices > Discover > Device Credentials > SNMP Communities.
Initially, the dialog box contains a default entry which covers all devices, provided device community strings are set to the default (public).
Step 2 Add new entries using one of these methods:
•Using the text boxes and lists for individual parameters. After you have specified all the parameters, click Add to add the community string to the list.
•Entering data directly in the list of community strings by using the following syntax:
target:read_community::timeout:retries:::write_community
You must enter the correct number of colons between variables. Otherwise, the community strings cannot be read.
Step 3 Click Save to apply your changes.
| Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine |
