Cisco Systems SOFTWARE RELEASE 2.5 Enter WLCCP Credentials for Wireless Domain Services (WDS)

4-27

Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine

78-15903-01

Chapter4 Configuring the CiscoWorks 11 05 and 1130 WLSE Setting Up Device Management

Step2 To add a port:

a. Enter the IP address or range of IP addresses that use t his po rt n umb er.

b. Enter the port number.

c. Click Save.

Step3 Repeat Step 2 to add more IP addresses and ports.

Enter WLCCP Credentials for Wireless Domain Services (WDS)

If you are using WDS on your wireless LAN, you must set up an AAA server (if

you don’t already have an AAA server set up), add WLCCP cr ed en tia ls, an d

configure the access point that is providing WDS.

To set up the AAA server, see Set Up AAA Servers, page4-22.

To configure the WLSE to authenticate with the access point providing WDS:

Step1 Select Devices > Discover > Device Credentials > WLCCP Credentials.

Step2 Enter the Radius User Name and Radius Password.

This is the user name and password that you set for the WLSE on the AAA server.

Step3 Click Save.

WDS is currently supported by on the Cisco Aironet 1100 and 1200 IOS-based

access points.

To configure the access point that will provide Wireless Domain Services:

Step1 Log in to the CLI interface.