Cisco Systems SOFTWARE RELEASE 2.5 warranty Adding AAA Servers to the WLSE

Chapter 4 Configuring the CiscoWorks 1105 and 1130 WLSE

Setting Up Device Management

Note When you set up the WLSE (see Adding AAA Servers to the WLSE, page 4-28), you will need the IP address or name of the system that is running CiscoSecure ACS Server.

Step 2 Click User Setup on the left side of the initial page.

Step 3 Enter a username for the user the WLSE will use for synthetic transactions and click Add/Edit.

Step 4 Enter a password in the first set of Password and Confirm Password textboxes. Click Submit.

Note When you set up the WLSE (see Adding AAA Servers to the WLSE, page 4-28), you will need this name and password.

Step 5 Click Network Configuration on the left side of the page.

Step 6 Click Add Entry. In the Add AAA Client area, enter the WLSE information in the following text boxes:

•Client Hostname—enter the WLSE hostname (or IP address)

•Client IP—enter the WLSE IP address

•Key—enter a secret key

Note You will need this key when you add AAA servers to the WLSE.

Adding AAA Servers to the WLSE, page 4-28

Step 7 Select RADIUS (Cisco Aironet) from the Authenticate Using list.

Step 8 Click Submit or Submit+Restart. A restart is required for the changes to take effect.

	Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-15903-01	4-23