Setting Up Device Management | Cisco Systems SOFTWARE RELEASE 2.5

Chapter 4 Configuring the CiscoWorks 1105 and 1130 WLSE

Logging into the Web Interface and Verifying Connectivity

Logging into the Web Interface and Verifying Connectivity

To verify HTTP and HTTPS connectivity, connect to the WLSE using a supported, properly configured Web browser and perform the following steps:

Step 1 To verify HTTP connectivity, enter the system IP address, followed by :1741 (the default port number).

For example, if the system IP address is 209.165.202.128, enter

http://209.165.202.128:1741.

If a login dialog box appears, you have connectivity.

Step 2 To verify HTTPS connectivity, enter the system IP address, prefixed by https. Do not use a port number.

For example, if the system IP address is 209.165.202.128, enter https://209.165.202.128.

If a login dialog box appears, you have connectivity.

Step 3 Enter the user name admin and the password you created during setup in the login dialog box. The WLSE home page appears.

Setting Up Device Management

The tasks in preparing the devices and the WLSE for use are:

•Setting Up Devices, page 4-14

•Adding Device Credentials to the WLSE, page 4-24

•Adding AAA Servers to the WLSE, page 4-28

•Discovering and Managing Devices, page 4-29

	Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-15903-01	4-13

Image 75

Cisco Systems SOFTWARE RELEASE 2.5 Logging into the Web Interface and Verifying Connectivity, Setting Up Device Management

Contents

Corporate Headquarters Copyright 2003, Cisco Systems, Inc. All rights reserved Iii N T E N T S Network Options Verifying the Configuration Upgrade Versions Vii Cisco 90-Day Limited Hardware Warranty Terms Viii Duration of Hardware WarrantyReplacement, Repair, or Refund Policy for Hardware To Receive a Return Materials Authorization RMA Number Cisco 90-Day Limited Hardware Warranty Terms Page Preface Xii AudienceConventions Convention Bewaar Deze Instructies Waarschuwing Belangrijke Veiligheidsinstructies Varoitus Tärkeitä Turvallisuusohjeita Warnung Wichtige SicherheitshinweiseXiv Aviso Instruções Importantes DE Segurança Avvertenza Importanti Istruzioni Sulla Sicurezza Xvi Varning! Viktiga Säkerhetsanvisningar Xvii Xviii Product Documentation Xix Document Title Description Obtaining Documentation Cisco.comDocumentation CD-ROM Obtaining Technical Assistance Ordering DocumentationDocumentation Feedback Cisco TAC Website Opening a TAC Case TAC Case Priority DefinitionsXxii Obtaining Additional Publications and Information Xxiv Supplemental License Agreement Installation and Use Software Upgrades, Major and Minor Releases Reproduction and DistributionXxvi Product Overview Software Features Bezel Features Bezel Features Front Panel Features Front Panel Features System Indicators and Buttons Indicator or Button Color Function Back Panel Features Serial Port Parameter Setting Pin Signal Definition Ethernet Connectors Network Cable Requirements Equipment Included in the Package 78-15903-01 Product Overview Equipment Included in the Package Safety Safety Säilytä Nämä Ohjeet Conservare Queste Istruzioni Guarde Estas Instrucciones General Precautions Maintaining Safety with Electricity Preventing EMI Protecting Against Electrostatic Discharge Preparing Your Site for Installation Choosing a Site for InstallationEnvironmental Grounding the System Creating a Safe Environment AC Power Cabling Precautions for Rack-Mounting 78-15903-01 Tools and Equipment Required for Installation 78-15903-01 Installation Quick Reference Installing the CiscoWorks Wireless LAN Solution Engine Installing the Wireless LAN Solution Engine in a Rack Installing the CiscoWorks 1130 Wireless LAN Solution Engine Installing the CiscoWorks 1130 Wireless LAN Solution Engine Rack Depth inches Front Adapter Part Number 91695 94089 Mounting bracket Push button Reinstall the front bezel Connecting Cables Connecting the Wlse to the AC Power Source Powering On the Wlse Next Steps-Configuration 78-15903-01 Task Steps References Configuration Quick Reference Logging into the Web Running the Setup Program Configuring the WLSE’s Network Information Prompt Response Description Configuring the Wlse Without a DNS Server Mailroute hostname ip-address Prompt Response Description Sample Response Configuring Name Resolution Changing the Configuration After Running SetupConfiguring the Wlse Without a DNS Server No ip name-server ip-address Verifying the Configuration # ping ip-address # nslookup dns-name Configuring the Web Browser Supported BrowsersClient Operating System Supported Browsers Select Tools Internet Options Privacy Configuring Internet ExplorerSelect Enable for Scripting of Java applets Select Tools Internet Options Security Configuring Netscape Navigator Select Enable all cookiesSelect Edit Preferences Wlse Next Steps-Finish Initial Configuration Setting Up Device Management Logging into the Web Interface and Verifying ConnectivityHttp//209.165.202.1281741 Cisco Discovery Protocol Setting Up DevicesSet Up Non-IOS Access Points and Wireless Bridges Tasks Procedure New User Set Up IOS Access Points Click SecurityClick User Manager About Configuration for WDS About Configuration for VLANs Ip ssh time-out Ip ssh authentication-retries Select Services Telnet/SSH Enable Secure Shell Set Up IOS Access Points by Using the Web Interface Select Services Telnet/SSH Click Read-OnlyClick Read-Write Use the snmp community communitystring ro Set Up Routers and SwitchesTask Procedure Mode and use the set snmp community read-only Set location-set system location location Set Up AAA Servers Adding AAA Servers to the WLSE, Adding Device Credentials to the Wlse Enter Http Credentials for Non-IOS Access Points Select Devices Discover Device Credentials Snmp Communities Enter Snmp Community Strings for All Managed Devices Enter Http Port Settings for IOS Access Points Enter Telnet or SSH Credentials for IOS Access Points Select Devices Discover Device Credentials Wlccp Credentials Enter Wlccp Credentials for Wireless Domain Services WDS Adding AAA Servers to the Wlse Select Devices Discover AAA ServerText Box Description Select Devices Discover Discover Advanced Options Configuring Discovery OptionsDiscovering and Managing Devices Task Reference Run CDP Discovery Discovering Devices Run CDP Discovery Now Modify the CDP Discovery Schedule Select Devices Discover DiscoverSelect Modify Periodic and click Next Import Devices from a File Import Devices Import Devices from a CiscoWorks Server Select Devices Discover Managing Devices Adding Users Select Administration User Admin Manage Users Next Steps Configuring the CiscoWorks 1105 and 1130 Wlse Next Steps Installing Software on CiscoWorks 1105 and 1130 Wlse Upgrade Versions Downloading the Upgrade ImageBacking Up the Wlse Upgrade Methods Upgrading by Using the Web Interface Upgrade Quick ReferenceInstalling from the Local Repository Field Data to Enter Select Administration Appliance Software Define Repository Subst f d\WLSErepository Installing from a Windows Server Appliance Software Status View Log Upgrading by Using the CLI Create a Local Repository Create the Repository Create a Repository on a Windows Server Install Install the Software Related CLI Commands At the following prompt, enter yes Upgrading from the Recovery CD Do you wish to continue Yes/No/Rescue yes 78-15903-01 Component Specifications Technical Specifications for CiscoWorks 1130 Wlse Component Specifications IN-1 D E IN-2 CDP IN-3 Http IN-4 IN-5 Snmp IN-6