
Control Codes
Character Font
[ESC] # Begin 12 x 12 print mode (Legacy Command)
ASCII | [ESC] # <0> | |
Hexadecimal | 1BH 23H 00H | |
Decimal | <27> <35> <0> | |
IPCL | &%QT |
|
EPOS | [ESC] ! <n> |
Description The [ESC] # <0> command begins 12 x 12 draft like print mode. Draft print is provided to maintain compatibility with other TransAct® products.
[ESC] I Set print size mode (Legacy Command)
ASCII | [ESC] I <n> | ||
Hexadecimal | 1BH 49H <n> | ||
Decimal | <27> <73> <n> | ||
IPCL | &%QT 12 x 12 draft mode | ||
| &%QU 12 x 14 large draft mode | ||
| &%QL 24 x 16 near letter quality (NLQ) mode | ||
| &%QS 24 x 16 near letter quality (NLQ) mode | ||
EPOS | [GS] ! <n> and/or | [ESC] ! <n> |
Description The [ESC] I <n> (e.g. capital “i”) command begins draft, large draft or near letter quality print mode.
Where n 0 = 12 x 12 like draft 1 = 12 x 14 like large draft
2 = 24 x 16 like near letter quality (NLQ) 3 = 24 x 16 like near letter quality (NLQ) 4 – 7 repeats 0 – 3
Note 1: The all characters printed by the Epic 880TM are generated from scaleable fonts. All these mode selections configure the font rendering code to generate fonts that are approximately equivalent to the matrix sizes indicated.
| Page 93 |
|
|