Control Codes
Carbon Copy Journal Mode
Carbon copy mode allows information sent to the receipt or validation station to be copied into the electronic journal. An electronic journal entry is started with a “Start Carbon Copy” mode command and continues until a station select command is received or a “Stop Carbon Copy” command is received. The carbon copy operation may be suspended and restarted by a “Carbon Copy Suspend” and “Carbon Copy Resume” command. (Note: “Carbon Copy Suspend” and “Carbon Copy Resume” commands do not generate new electronic journal records.)
Function | Electronic Carbon Copy Begin | |
ASCII | [ESC]l <3> | |
Hexadecimal | 1BH 6CH<3> | |
Decimal | <27> <108><3> | |
IPCL | &%EB |
|
EPOS |
|
|
Description This command begins a carbon copy journal entry. | ||
Function | Electronic Carbon Copy Suspend | |
ASCII | [ESC]l <2> | |
Hexadecimal | 1BH 6CH<2> | |
Decimal | <27><108><2> | |
IPCL | &%ES |
|
EPOS |
|
|
Description This command temporarily suspends carbon copy journal entry. | ||
Function | Electronic Carbon Copy Resume | |
ASCII | [ESC]l <1> | |
Hexadecimal | 1BH 6CH<1> | |
Decimal | <27><108><1> | |
IPCL | &%ER |
|
EPOS |
|
|
Description This command resumes a temporarily suspended carbon copy journal entry.
Function | Electronic Carbon Copy End | |
ASCII | [ESC]l <0> | |
Hexadecimal | 1BH 6CH<0> | |
Decimal | <27> <108><0> | |
IPCL | &%EE |
|
EPOS |
|
|
Description This command ends a carbon copy journal entry.
| Page 151 |
|
|
