
Mounting Requirements
Spindle Mounting Options
The Epic 880TM spindle assembly can be mounted in one of five locations on the left side of the printer or one of four locations on the control panel side.
The following figures show typical mounting locations and cable dressing options.
45˚ Up Spindle Mounting
Pivot and Locating
Screws
Paper Spindle
Bracket
Figure 11. 45˚ Up Spindle Location
Figure 11 shows the 45˚ Up spindle position with the arm at a 45˚ angle up. Note the location of the pivot and mounting screws.
| Page 47 |
|
|