Control Codes
[ESC] d | Feed <n> lines at the current spacing | |
ASCII | [ESC] d <n> | |
Hexadecimal | 1BH 64H <n> | |
Decimal | <27> <100> <n> | |
IPCL | &%FL <m1> <m2> | |
EPOS | [ESC] d |
Description The [ESC] d <n> command prints the contents of the buffer (if any) and performs <n> line feeds at the current line spacing. The command does not change the default line spacing value. The next character print position is reset to the left margin.
Note: The IPCL command prints from 00 to 99 lines. For example, if you wish to
feed 12 lines, the IPCL command would be as follows: &%FL12.
Function | Reverse feed <n> lines at the current spacing | |
ASCII | [ESC] e <n> | |
Hexadecimal | 1BH 65H <n> | |
Decimal | <27> <101> <n> | |
IPCL | &%FB <m1> <m2> | |
EPOS | [ESC] e |
Description The [ESC] e <n> command prints the contents of the buffer (if any) and performs <n> reverse line feeds at the current line spacing. The command does not change the default line spacing value. The next character print position is reset to the left margin.
Note: The reverse feed is limited to 2 lines. Do NOT attempt to reverse feed more than 2 lines or the paper could jam.
Note: The IPCL command prints from 00 to 99 lines. For example, if you wish to feed
12 lines, the IPCL command would be as follows: &%FL12.
[VT] | Vertical tab |
ASCII [VT]
Hexadecimal 0BH
Decimal <11>
IPCL &%VT
EPOS (VT)
Description The printer sets a line counter to the top of the form at reset and when a set top of form command is issued. By setting vertical tab stops, various form positions can be reached with a [VT] operation.
Page 82 |
|
|
|