Control Codes
bit 6 = 1 always bit 7 = 0 always
<r2>: bit 0 = 1 always
bit 1 = Cover is closed. bit 2 = Buffer is empty.
bit 3 = Printer has been power cycled,
Reading this does not affect the state of the
bit 4 = Printer is waiting in an error mode.
Use [ENQ]<22> to identify the specific error and [ENQ]<10> to recover
bit 5 = USB Watch Dog recovery has occurred. bit 6 = 1 always
bit 7 = 0 always
<r3>: bit 0 = 0 always bit 1 = 1 always
bit 2 = Jam detected bit 3 = 0 always
bit 4 = 0 always
bit 5 = Printer is blocking print (Cover is open or out of paper.)
bit 6 = 1 always bit 7 = 0 always
<r4>: bit 0 = 1 Printer supports single station print. bit 1 = 0.
bit 2 = Printer supports multiple colors bit 3 = Printer supports cutter
(Partial cut command is supported as full cut) bit 4 = Printer supports cutter.
bit 5 = 0
bit 6 = 1 always bit 7 = 0 always
<r5>: 0
<r6>: 0
<r7>: 0
| Page 167 |
|
|
