Epson 100-88002 manual Msb, Lsb

Control Codes

unsigned int Error Vectors; unsigned int Auto Cutter Faults; unsigned int Power On Time; unsigned int System Active Time; unsigned int Head Over Temps; unsigned int Cutter Re-Home; unsigned int Jam Detect L1; unsigned int Jam Detect L2; unsigned int Missed Top of form; unsigned int Configuration Faults; unsigned int Not used; unsigned int Flash File Fault; unsigned int Jam Detect L3; unsigned int Retracts; unsigned int USB Watch Dog; unsigned int RAM Faults;

[ENQ] <33>		Inquire Firmware ID and Rev.
ASCII	[ENQ] <33>
Hexadecimal		05H 21H
Decimal	<5> <33>
Function	The [ENQ] <33> command returns the Firmware ID and revision.
Response	[ACK] <33> <51> PE8805-X.XX.

Where

<33> Is the echo of command

<51> Length + 40

Firmware ID PE8805

Separator - (0x2D or 45D)

Rev X.XX (Current Revision in ASCII)

[ENQ] <34>		Inquire Firmware CRC.
ASCII	[ENQ] <34>
Hexadecimal		05H 22H
Decimal	<5> <34>
Function	The [ENQ] <34> command returns the Firmware ID and revision.
Response	[ACK] <34> <42> <MSB> <LSB>
Where
<34>	Is the echo of command
<42>	Length + 40
<MSB>	Most significant 8 bits of the 16 bit CRC
<LSB>	Least significant 8 bits of the 16 bit CRC

100-88002 Rev B Page 173