Unplug the product and refer servicing to qualified service personnel under the following conditions: if the power cord or plug is damaged; if liquid has entered the product; if the product has been dropped or the case damaged; if the product does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions.

Leave the ink cartridges installed. Removing the cartridges can dehydrate the print head and may prevent the product from printing.

Before transporting the product, make sure that the print head is in the home (far right) position and the ink cartridges are in place.

When storing or transporting the product, do not tilt it, stand it on its side, or turn it upside down; otherwise ink may leak.

Parent topic: Important Safety Instructions

Ink Cartridge Safety Instructions

Keep ink cartridges out of the reach of children and do not drink the ink.

Be careful when you handle used ink cartridges; there may be ink remaining around the ink supply port. If ink gets on your skin, wash it off with soap and water. If it gets in your eyes, flush them immediately with water.

Do not put your hand inside the product or touch any cartridges during printing.

Install a new ink cartridge immediately after removing an expended one. Leaving cartridges uninstalled can dry out the print head and may prevent the product from printing.

Do not remove or tear the label on the cartridge; this can cause leakage.

Do not remove the transparent seal from the bottom of the cartridge. This may cause the cartridge to become unusable.

Do not break the hooks on the side of the cartridge when removing it from the packaging.

Do not touch the green IC chip on the side of the cartridge. This may prevent normal operation.

Do not shake cartridges after opening their packages; this can cause them to leak.

If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the product. Note that there is a valve in the ink supply port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining items that the cartridge touches. Do not touch the ink cartridge ink supply port or surrounding area.

Use an ink cartridge before the date printed on its package.

Do not dismantle an ink cartridge. This could damage the print head.

Store ink cartridges in a cool, dark place.

298

Page 298
Image 298
Epson WF2660 manual Ink Cartridge Safety Instructions