• If there are gaps or the pattern is faint, click Clean to clean the print head again.

If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced.

Parent topic: Print Head Cleaning

Related tasks

Cleaning the Print Head Using the Product Control Panel

Checking the Nozzles Using the Product Control Panel

Removing and Installing Ink Cartridges

Print Head Alignment

If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or light horizontal bands, you may need to align the print head.

Note: Banding may also occur if your print head nozzles need cleaning.

Aligning the Print Head Using the Product Control Panel

Aligning the Print Head Using a Computer Utility

Parent topic: Adjusting Print Quality

Aligning the Print Head Using the Product Control Panel

You can align the print head using the control panel on your product.

1.Load a few sheets of plain paper in the cassette.

2.Press the home button, if necessary.

3.Select Setup.

4.Select Maintenance.

227

Page 227
Image 227
Epson WF2660 manual Print Head Alignment, Aligning the Print Head Using the Product Control Panel, Select Maintenance