Line of Dots Appears in All Scanned Images

If a line of dots appears in all your scanned images, clean the scanner glass with a soft, dry, lint-free cloth or use a small amount of glass cleaner on the cloth, if necessary. Paper towels are not recommended.

Caution: Do not spray glass cleaner directly on the scanner glass.

Parent topic: Solving Scanned Image Quality Problems

Related tasks

Cleaning Your Product

Straight Lines in an Image Appear Crooked

If straight lines in an original appear crooked in a scanned image, make sure to place your original straight when you scan it.

Parent topic: Solving Scanned Image Quality Problems

Related topics

Placing Originals on the Product

Image is Distorted or Blurry

If a scanned image appears distorted or blurry, try these solutions:

Make sure your original is not wrinkled or warped. This may prevent the original from laying flat on the scanner glass.

Do not move your original or your product during scanning.

Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that extends beyond the base of the product in all directions.

Adjust these Epson Scan settings (if available) and try scanning again:

Select the Unsharp Mask setting.

Adjust the Auto Exposure setting.

Increase the Resolution setting.

Parent topic: Solving Scanned Image Quality Problems

Related topics

Selecting Epson Scan Settings

278

Page 278
Image 278
Epson WF2660 manual Line of Dots Appears in All Scanned Images, Straight Lines in an Image Appear Crooked